모델명 : ETCR035AD

원산지 : CHINA

브랜드 : ETCR

Ⅰ. Introduction

ETCR035AD Clamp AC/DC Current Sensor is specially designed to test current and leakage of circuit below AC/DC600, with small size, high accuracy, good stability. 

It is widely applied in AC current leakage, current, power and energy measurement with high precision and small phase error of electricity, communications, meteorology, 

railway, oilfield, construction, measurement, scientific and research teaching unit, industrial and mining enterprises, which can be connected to a variety of high precision digital multi-meter and data recorder

상세페이지1

Ⅱ. Technical Specification

Function

AC/DC current detection

Power Supply

Battery, 6LR61 9VDC (can connect external power supply)

Test model

Clamp CT, Non contact measurement, non-exposure of meter of the jaw

Dimension

185mm×70mm×38mm

Clamp Size

30mm×35mm

AC Frequency

45~400Hz

Range

AC/DC 0.0A～1000A

Resolution

0.1A

Accuracy

2%（23℃±3℃，below 70%RH）

Output

1mV/A

Frequency Response

10KHz(-3dB)

Zero-Adjustment

Yes

Lead length

2m

Wire Position

Detected wire should be put on the centre of the jaw

Circuit Voltage

Lower than AC600V

Power on/off

Push ON/OFF key

Auto Power-off

5 Minutes after power on, it will power off automatically to lower the power consumption

Battery Voltage

Indicating the battery voltage is lower then 7.2V.Then the battery have to be changed

Weight

180g（including the battery）

Consumption

10mW

Auto Power-off

5 Minutes after power on, it will power off automatically to lower the power consumption

Working environment

-20℃～50℃；below 80%rh

Storage environment

-10℃～60℃；below 70%rh

Max error refer to environment

-10℃～0℃ or 40℃～50℃，Error will increase max to 1%rdg

Insulation strength

AC2kV/rms (between core and shell)

Safety rules

IEC1010-1, IEC1010-2-032, Pollution degree 2、CAT Ⅲ(600V)

Accessary

Sensor：1PC; Battery (6F22 9V): 1PC